Laboratory Paid Analysis

Laboratory Paid Analysis

PAID ANALYSIS SERVICES

Once the 'Experiment Request Form,' 'Petkim Test Services General Specification,' and 'Customer Registration Application Form' below have been completed and signed, they must be submitted to the Quality Assurance and Technical Services Department either through courier delivery or in person.

Important Considerations for Sample Submission
Please take the following into consideration when sending samples:
  • If available, samples should be sent in their original packaging.
  • In the absence of original packaging, securely seal the samples in appropriate containers such as plastic, paper, glass, or other suitable materials that match the sample type.
  • Ensure that the sample packaging is designed to prevent moisture absorption. For light-sensitive samples, use dark-colored packaging. Additionally, package multiple samples separately to avoid contact with each other.
  • To protect the sample and its packaging from damage, ensure that the package is resistant to bending, tipping, and breaking during transportation.
  • In the event of samples sent by official institutions with a damaged seal, PETKİM will accept the sample upon the institution's approval, and the damaged seal will be duly noted in the final report.
  • Please note that PETKİM holds no responsibility for any environmental threats or adverse effects on human health that may occur during the transportation of the samples to our facility.

Analysis of Petkim Products

Acrylonitrile (ACN) Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY @ 25°C/15.5°C - ACRN 23, ASTM D1298 894,0
ACETONITRILE mg/kg ASTM E1863 5403,4
ACETONE mg/kg ASTM E1863 5403,4
PROPIONITRILE mg/kg ASTM E1863 5403,4
METAACRYLONITRILE mg/kg ASTM E1863 5403,4
FUMARONITRILE mg/kg ASTM E1863 5403,4
NICOTINONITRILE mg/kg ASTM E1863 5403,4
SUCCIONITRILE mg/kg ASTM E1864 5403,4
BENZENE mg/kg ASTM E1863 5403,4
ACRYLONITRILE mg/kg ASTM E1863 5403,4
ACIDITY (ACETIC ACID) mg/L ACRN-4-1 1869,4
ALDEHYDES mg/L ACRN-5-1 2947,3
COLOR (Pt-Co) - ACRN-7-1, ASTM E1178, ASTM D1209 1869,4
COPPER mg/L ACRN-8-1 2947,3
HYDROGEN CYANIDE mg/L ACRN-12-1, ASTM E1178 2578,9
MEHQ mg/L ACRN-13-1, ASTM E1178 1869,4
DISSOLVED IRON mg/L ACRN-14-1 2947,3
NON-VOLATILE MATTER mg/L ACRN-16-1 1869,4
PEROXIDE mg/L ACRN-18-1, ASTM E1784 1869,4
WATER mg/kg ACRN-22-1, ASTM E1178, ASTM E203 2947,3
REFRACTIVE INDEX (20°C) - ACRN-20 2947,3
pH (%5), 25°C - ACRN-19-1 1842,1
TURBIDITY NTU ASTM D-6855 559,4
ACROLEIN mg/L ASTM E1863 5403,4

Vinyl Chloride Monomer (VCM) and Ethylene Dichloride (EDC) Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
VCM COMPOSITION % w ASTM D5507, SOLVAY-2.2.01 8637,3
IRON-3 mg/L SOLVAY-1.2.03 2592,6
ACIDITY mg/kg SOLVAY-1.2.07, SOLVAY-1.2.02 1487,3
WATER mg/kg SOLVAY-1.2.08, SOLVAY-1.2.05,ASTM E203 2961,0
PLATINUM-COBALT COLOR - ASTM D1209 1855,7

Monoethylene Glycol (MEG) and Diethylene Glycol (DEG) Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY @ 20°C/20°C - ASTM E202 1814,8
DISTILLATION RANGE °C ASTM D1078 4148,1
MEG, DEG % w ASTM E202, ASTM E2409 5758,2
ACIDITY (ACETIC ACID) mg/kg ASTM E202, ASTM E2679 1487,3
WATER mg/kg ASTM E202, ASTM E203 2947,3
CHLORIDE mg/kg SMS-1677-82 2947,3
COLOR (Pt-Co) - ASTM E202, ASTM D1209 1842,1
ASH mg/kg ASTM E202, ASTM D482 4148,1
TOTAL IRON mg/L ASTM E202, ASTM E394 2224,1
ALDEHYDES (FORMALDEHYDE) mg/L SMS-1996-89, ASTM D2194 2606,2
UV TRANSMITTANCE (220nm, 275nm, 350nm) %T SMS-1997-82, ASTM E2193 2224,1

Pure Terephthalic Acid (PTA) Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
ACID NUMBER mg KOH/g ACL-1 1842,1
MOISTURE % w ACC-TA-14 2947,3
4-CARBOXYBENZALDEHYDE mg/kg ASTM D7883, ACL-5 3711,4
p-TOLUIC ACID mg/kg ASTM D7883 2606,2
ASH mg/kg ACC-TA-12 2947,3
METALS (Na, Co, Mn, Cr, Ni, Fe, K) mg/kg ACC-TA-13 7395,6
IRON (Fe) mg/kg ACC-TA-13 736,8
COLOR CIE b* - ACL-36 1842,1
DELTA Y - ACL-37 1842,1

Phthalic Anhydride (PA) Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
PHTHALIC ANHYDRIDE % w PETKIM-G2-40D04 2510,7
OXIDIZABLE MATTER (MALEIC ANHYDRIDE) % w PETKIM-G2-40D01 1487,3
SOLIDING POINT °C PETKIM-G2-40D05 1842,1
MOLTEN COLOR (Pt-Co) - ASTM D3366 1842,1
COLOR STABILITY - ASTM D3366 2224,1
ACIDITY (PHTHALIC ACID) % w PETKIM-G2-40D02 1487,3

Benzene Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
DENSITY g/cm3 ASTM D4052 1801,1
DISTILLATION °C ASTM D850 4148,1
ACID WASH COLOR - ASTM D848 2169,6
PLATINUM-COBALT SCALE - ASTM D1209 1801,1
NON - AROMATIC %w ASTM D7504, UOP 744 9537,9
TOLUENE %w ASTM D7504, UOP 744 9537,9
BENZENE %w UOP 744, ASTM D7504 9537,9
1-4 DIOXANE mg/kg ASTM D7504, UOP 744 9537,9
METHYLCYCLOHEXANE mg/kg ASTM D5134, ASTM D6730, UOP 744 9537,9
METHYLCYCLOHEPTANE mg/kg ASTM D5134, ASTM D6730, UOP 744 9537,9
SOLIDIFICATION POINT °C ASTM D852 2169,6
THIOPHEN mg/kg ASTM D7011, ASTM D5623, ASTM D5504, ASTM D6228 8637,3
TOTAL SULFUR mg/kg ASTM D3120, ASTM D7183 5758,2

Paraxylene Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY - ASTM D4052 1801,1
DISTILLATION °C ASTM D850 4148,1
ACID WASH COLOR - ASTM D848 2169,6
PLATINUM-COBALT SCALE - ASTM D1209 1801,1
P-XYLENE ASTM D7504, UOP720 8637,3
NON - AROMATIC %w UOP 720, ASTM D7504 8637,3
BENZENE mg/kg ASTM D7504, UOP720 8637,3
TOTAL SULFUR mg/kg ASTM D3120, ASTM D7183 5758,2
BROM INDEX mg Br/100 g ASTM D2710 5035,0

Ortoxylene Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY ASTM D4052 1801,1
DISTILLATION °C ASTM D850 4148,1
PLATINUM-COBALT SCALE - ASTM D1209 1801,1
NON - AROMATIC %w ASTM D7504, UOP744 9537,9
O-XYLENE %w ASTM D7504, UOP744 9537,9
TOLUENE mg/kg ASTM D7504, UOP744 9537,9
BENZENE mg/kg ASTM D7504, UOP744 9537,9
ETHYL BENZENE %w ASTM D7504, UOP744 9537,9
P-XYLENE %w ASTM D7504, UOP744 9537,9
M-XYLENE %w ASTM D7504, UOP744 9537,9
CUMEN (ISOPROPYLE BENZENE) A9 mg/kg ASTM D7504, UOP744 9537,9
TOTAL SULFUR mg/kg ASTM D3120, ASTM D7183 5758,2

C5 Mixture Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
REID VAPOR PRESSURE psi ASTM D323 4148,1
BENZENE %w UOP 744, ASTM D7504 9537,9
NON - AROMATIC %w UOP 744, ASTM D7504 9537,9

Toluene Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY ASTM D4052 1801,1
DISTILLATION °C ASTM D850 4148,1
ACID WASH COLOR - ASTM D848 2169,6
PLATINUM-COBALT SCALE - ASTM D1209 1801,1
NON - AROMATIC %w ASTM D7504, UOP744 9537,9
TOLUENE %w ASTM D7504, UOP744 9537,9
BENZENE %w ASTM D7504, UOP744 9537,9
ETHYL BENZENE %w ASTM D7504, UOP744 9537,9
P-XYLENE %w ASTM D7504, UOP744 9537,9
M-XYLENE %w ASTM D7504, UOP744 9537,9
O-XYLENE %w ASTM D7504, UOP744 9537,9
ACIDITY, NaOH / 100 mL ASTM D847 3233,9
TOTAL SULFUR mg/kg ASTM D3120, ASTM D7183 5758,2
WATER mg/kg ASTM E1064 2961,0

Aromatic Oil Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY - ASTM D1298 1801,1
WATER %v ASTM D95 2961,0
N-HEPTANE INSOLUBLES %w ASTM D3279 4980,4
ASH %w ASTM D482 5035,0
TOTAL SULFUR %w ASTM D4294 5758,2
SODIUM* (Sample preparation included.) mg/kg ICP OES 3233,9
POTASSIUM* (Sample preparation included.) mg/kg ICP OES 3233,9
BMCI Hesap - 10070,0

Pygas Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY - ASTM D4052 1801,1
API GRAVITY API ASTM D4052 1801,1
DISTILLATION °C ASTM D86 4148,1
GUM mg/100mL ASTM D381 7463,8
REID VAPOR PRESSURE psi ASTM D323, ASTM D1267 4148,1
NON - AROMATIC %w UOP 744, ASTM D5134, ASTM D6730 10793,2
TOLUENE %w UOP 744, ASTM D5134, ASTM D6730 10793,2
BENZENE %w UOP 744, ASTM D5134, ASTM D6730 10793,2
ETHYL BENZENE %w UOP 744, ASTM D5134, ASTM D6730 10793,2
P-XYLENE %w UOP 744, ASTM D5134, ASTM D6730 10793,2
M-XYLENE %w UOP 744, ASTM D5134, ASTM D6730 10793,2
O-XYLENE %w UOP 744, ASTM D5134, ASTM D6730 10793,2
STYRENE %w UOP 744, ASTM D5134, ASTM D6730 10793,2
C9 AROMATICS + HEAVY %w UOP 744, ASTM D5134, ASTM D6730 10793,2
DIENE VALUE g/100 g UOP 326 7259,1
TOTAL SULFUR mg/kg ASTM D4294 5758,2
TOTAL ORGANIC CHLORINE mg/kg ASTM D5808, UOP 779 5771,8

Ethylene Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
ETHYLENE %v ASTM D6159 8992,1
METHANE %v ASTM D6159 8992,1
ETHANE %v ASTM D6159 8992,1
ACETYLENE µL/L ASTM D6159 8992,1
TOTAL C3 AND HEAVIES µL/L ASTM D6159 8992,1
CARBONMONOXIDE µL/L ASTM D 2504, UOP 603 6222,1
CARBONDIOXIDE µL/L ASTM D2505 6222,1
HYDROGEN µL/L ASTM D2504 6222,1
NITROGEN µL/L ASTM D2505 6222,1
OXYGEN µL/L ASTM D2504, Oksijenmetre 6222,1
MOISTURE µL/L ASTM D2029 3697,8
TOTAL SULPHUR mg/kg ASTM D3246 5758,2
METHANOL µL/L ASTM D7423 7204,6
AMMONIUM NITROGEN (AMMONİA) mg/L SM-4500 NH3 A/B/C 7204,6
OIL IN ETHYLENE mg/kg INHOUSE 9551,5

Chemical Purity Propylene (CPP) and Polymer Purity Propylene (PSP) Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
ETHYLENE %v ASTM D2712 8992,1
METHANE %v ASTM D2712 8992,1
ETHANE %v ASTM D2712 8992,1
ACETYLENE µL/L ASTM D2712 8992,1
CARBONMONOXIDE µL/L ASTM D 2504, UOP 603 6222,1
CARBONDIOXIDE µL/L ASTM D2505 6222,1
HYDROGEN µL/L ASTM D2504 6222,1
NITROGEN µL/L ASTM D2505 6222,1
OXYGEN µL/L ASTM D2504, Oksijenmetre 6222,1
MOISTURE µL/L ASTM D2029 3697,8
TOTAL SULPHUR mg/kg ASTM D3246 5758,2
METHYL ACETYLENE µL/L ASTM D2712 8992,1
PROPADIEN µL/L ASTM D2712 8992,1
PROPYLENE %v ASTM D2712 8992,1
PROPANE %v ASTM D2712 8992,1
CYCLOPROPANE µL/L ASTM D2712 8992,1
OTHER C4 µL/L ASTM D2712 8992,1
1.3-BUTADIEN µL/L ASTM D2712 8992,1
METHANOL µL/L ASTM D7423 7204,6

Raw C4 Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY - ASTM D3588, ASTM D2598 8296,2
ISO-BUTENE %w ASTM D4424 8992,1
1-BUTENE %w ASTM D4424 8992,1
CIS-2-BUTENE %w ASTM D4424 8992,1
TRANS-2-BUTENE %w ASTM D4424 8992,1
1.3-BUTADIEN %w ASTM D4424 8992,1
1.2-BUTADIEN %w ASTM D4424 8992,1
TOTAL C5 AND HEAVIER %w ASTM D4424 8992,1
PROPADIENE + TOTAL ACETYLENE %w ASTM D4424 8992,1
TERT BUTYL CATECHOL (TBC ) mg/kg ASTM D1157 2961,0
TOTAL SULPHUR mg/kg ASTM D3246 5758,2
CARBONYL mg/kg ASTM D4423 3602,3
PEROXİDE mg/kg ASTM D5799 5553,5
METHANOL µL/L ASTM D7423 7204,6
DETERMINATION OF TOTAL CHLORIDE IN LPG AND GASEOUS HYDROCARBONS BY MICROCOULOMETRY ppmw or ppmv UOP 910 8296,2
ACETONİTRİLE mg/kg PETKİM GC 8296,2

Chlorine Alkali (Caustic) Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SODIUM CHLORIDE mg/kg NaOH TS EN 896, ASTM E291 1855,7
CHLORIDE mg/kg NaOH TS EN 896, ASTM E291 1855,7
SODIUM CHLORATE mg/kg NaOH TS EN 896 1855,7
SODIUM CARBONATE %w TS EN 896 1855,7
SODIUM HYDROXIDE %w TS EN 896, ASTM E291 1855,7
DENSITY g/cm3 ASTM D1298 1855,7
MERCURY mg/kg NaOH TS EN 896 1855,7
ANTIMONY mg/kg NaOH TS EN 896 1855,7
CADMIUM mg/kg NaOH TS EN 896 1855,7
CHROMIUM mg/kg NaOH TS EN 896 1855,7
NICKEL mg/kg NaOH TS EN 896 1855,7
LEAD mg/kg NaOH TS EN 896 1855,7
SELENIUM mg/kg NaOH TS EN 896 1855,7
ARSENIC mg/kg NaOH TS EN 896 1855,7
TOTAL IRON mg/kg NaOH TS EN 896 1855,7
COPPER mg/kg NaOH TS EN 896 1855,7
SULPHATE mg/kg NaOH TS 1865, DIN 19616 1855,7

Polymer and Plastics Analysis

Polymer and Plastics Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
MELT FLOW INDEX g/10 dk ASTM D1238, TS EN ISO 1133 1855,7
DENSITY, 23°C g/cm3 ASTM D792, ISO 1183-METHOD A 2961,0
ASH CONTENT %w ASTM D5630, ASTM D2584 2961,0
MELTING AND CRYSTALLIZATION POINT °C ASTM D3418 3329,4
GLASS TRANSTION TEMPERATURE (DSC) (Measurements can be made at temperatures above 30°C.) °C ASTM E1356 4434,6
OXIDATION INDUCTION TIME (SINGLE POINT MEASUREMENT) dk ASTM D3895, TS EN 728 4434,6
OXIDATION INDUCTION TIME (ANALYSIS OF THE PIPES IN THE INNER-MIDDLE-OUTER SECTION) dk ASTM D3895, TS EN 728 8882,9
CHARACTERIZATION WITH FT-IR - ASTM E1252 4066,2
CHARACTERIZATION WITH FT-IR IN RUBBER - ASTM D3677 7395,6
THERMAL CHARACTERIZATION WITH TGA %w ASTM E1131 5921,9
CARBON BLACK CONTENT IN PLASTICS %w ASTM E1131 5921,9
CALSIT ANALYSIS %w INHOUSE 3697,8
DETERMINING THE TYPE AND AMOUNT OF FILLER IN PLASTIC MATERIAL %w TGA, XRF, XRD yöntemlerinden bir veya birkaçı ile 8882,9
ELEMENTAL ANALYSIS OF PLASTIC MATERIAL (WITH ICP)* (Sample preparation is included.) mg/kg ICP OES 5921,9
ELEMENTAL ANALYSIS OF PLASTIC MATERIAL (WITH XRF)* (Sample preparation is included.) %w XRF 8882,9
SAMPLE PREPARATION FROM POLYMER RAW MATERIAL - PETKIM METODU 3329,4
TENSILE STRENGTH** MPa ASTM D638 2961,0
FLEXURAL MODULUS** MPa TS EN ISO 178 2961,0
ENVIRONMENTAL STRESS CRACKING(F50) - Up to 100 Hours** saat ASTM D1693 4434,6
ENVIRONMENTAL STRESS CRACKING(F50) - Over 100 hours** saat ASTM D1693 7395,6
TENSILE STRENGTH OF PLASTIC FILMS MPa ASTM D882 4434,6
PROPAGATION TEAR RESISTANCE OF PLASTIC FILMS N ASTM D1922 4434,6
FILM DIMENSIONS (WIDTH AND LENGTH) mm - 1487,3
THICKNESS DISTRIBUTION AND AVERAGE THICKNESS micron ASTM D6988 1487,3
IMPACT RESISTANCE OF PLASTICS g ASTM D1709 4434,6
HAZE OF TRANSPARENT PLASTICS % ASTM D1003 1855,7
TRANSMITTANCE OF TRANSPARENT PLASTICS % ASTM D1003 1855,7
GLOSS OF PLASTICS - ASTM D2457 1855,7
FILM QUALITY AND FILM PREPARATION BY BLOWN AND CAST FILM EXTRUSION (WITH MAX. 1 KG OF MATERIAL) - - 11107,0
COLOR IN FILMS (L,a,b,WI,YI) - ASTM E313, HUNTERLAB LABSCAN XE 1855,7
COULOMETRIC DETERMINATION OF MOISTURE IN PLASTICS %w ASTM D6869 2961,0
HARDNESS (SHORE D) - ASTM D2240 1487,3
PARTICUL SIZE AND DISTRUBUTION ANALSIS - ISO 13320 4434,6
DRY SIEVE ANALYSIS (WITH CAMSIZER) 4434,6
DRY SIEVE ANALYSIS (WITH SHAKING SIEVE) % w ASTM D1921 2224,1
XYLENE SOLUBILITY % ASTM D5492 7395,6
COLOR VALUE IN SOLID RAW MATERIAL (L,a,b, WI, YI) - ASTM E313, HUNTERLAB LABSCAN XE 1855,7
SOLVENT EXTRACTION - ASTM E168 2961,0
K VALUE (CYCLOHEXANON) - TS EN ISO 1628-2 3697,8
PACKING DENSITY g/cm3 SOLVAY-18/72 1487,3
VOLATILE MATERIAL % w TS EN ISO 1269 1487,3
BULK DENSITY g/cm3 ASTM D1895, TS 448 EN ISO 60 1487,3
POLLUTION IN PVC RAW MATERIAL (POWDER) number/9dm2 TS EN ISO 1265 1487,3
VCM DETERMINATION IN PVC PRODUCTS mg/kg ASTM D4443, TS EN ISO 6401 7204,6
DETERMINATION OF VCM IN PVC RAW MATERIAL (POWDER) mg/kg ASTM D3749 7204,6
PVC DEFORMULATION ANALYSIS % w PETKİM METODU 14791,2
BALANCE STYRENE mg/kg TS ISO 2561 5553,5
RESIDUAL STYRENE IN POLYSTRENE mg/kg TS ISO 2561 11107,0

Hydrocarbon and Oil Analysis

Hydrocarbon Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SPECIFIC GRAVITY @ X°C / X°C - ASTM D4052 1801,1
SPECIFIC GRAVITY (Gas, Shilling Method) - UOP 114 2169,6
DENSITY @ X°C g/mL ASTM D4052 1801,1
DISTILLATION °C ASTM D850, ASTM D86, ASTM D1078 4148,1
COMPOSITION IN GAS PHASE % w, % v veya % M ASTM D2163, ASTM D2505, ASTM D2712, UOP 539, ASTM D6159 9537,9
LIQUID PHASE COMPOSITION %w UOP 744, UOP 720, ASTM D6730 9537,9
NATURAL GAS ANALYSIS %v ISO 6976 10793,2
LPG ANALYSIS %v ASTM D2163 10793,2
ACID WASH COLOR - ASTM D848 1590,0
WATER mg/kg ASTM E1064, ASTM E203 2961,0
PLATINUM-COBALT SCALE - ASTM D1209 1801,1
SOLIDIFICATION POINT °C ASTM D852 2169,6
ACIDITY mg NaOH/100 mL ASTM D847 3233,9
COPPER STRIP CORROSION - ASTM D849 2483,4
THIOPHEN mg/kg ASTM D5623, ASTM D7011 8637,3
CARBON DISULFIDE mg/kg ASTM D5623, ASTM D7011 8637,3
TOTAL SULFUR % w, mg/kg ASTM D3120, ASTM D7183, ASTM D4294, ASTM D3246, ASTM D6667, ASTM D5453 5758,2
BROM INDEX mg /100 g ASTM D2710 5035,0
CARBONYl (Paradiethyl Benzene) mg/L, mg/kg UOP-624 10793,2
REID VAPOR PRESSURE psig ASTM D323, ASTM D1267 4148,1
BROM NUMBER g /100 g ASTM D1159 4148,1
GUM, mg / 100 mL - ASTM D381 7463,8
OCTANE RON ASTM D2699 12444,2
DIENE VALUE g/100g UOP-326 7259,1
LEAD µg/kg UOP-350 9715,2
PIONA % w ASTM D5443, ASTM 6839, ISO 225 12594,3
SAYBOLT COLOR - ASTM D156 2169,6
MERKAPTAN, SULFUR % w ASTM D3227 6222,1
METHANOL mg/kg ASTM D7423 7204,6
MERCURY µg/kg CİVA ANALİZÖRÜ,UOP 938 Appendix B 12444,2
MTBE mg/kg ASTM D4815, ASTM D7423 7204,6
REFRACTIVE INDEX - ASTM D1218 2961,0
NONVOLATİLE MATTER mg/100 mL TM 029, ASTM D1353 3602,3
FLASH POINT, OPEN CUP °C ASTM D92 4148,1
FLASH POINT, CLOSED CUP °C ASTM D93 4148,1
TOTAL ORGANIC CHLORINE (Aliphatic and Aromatic Hydrocarbons) mg/kg ASTM D5808 10793,2
TOTAL ORGANIC NITROGEN (Aliphatic and Aromatic Hydrocarbons) mg/kg ASTM D7184 10793,2
DETAILED HYDROCARBON ANALYSIS mg/kg ASTM D5134, ASTM D6729 8296,2
SULFUR COMPOUNDS (SCD) mg/kg ASTM D5504,ASTM D5623, ASTM D6228 8637,3
DOCTOR TEST − ASTM D4952 4148,1
APPEARANCE OF CLEAR − ASTM E2680 1241,7
TRACE NITROGEN DETERMINATION IN LIQUID HYDROCARBONS μg/g ASTM D4629 6222,1

Oil Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
DENSITY @ X°C g/mL ASTM D4052 1801,1
SPECIFIC GRAVITY @ X°C / X°C - ASTM D4052 1801,1
API GRAVITY @ X°C / X°C °API ASTM D4052 1801,1
VISCOSITY,KINEMATIC @ X°C cSt ASTM D445 4325,5
VISCOSITY INDEX - ASTM D445 6222,1
VISCOSITY, SSU - ASTM D88 4325,5
VISCOSITY, SSF - ASTM D88 4325,5
FLASH POINT, OPEN CUP °C ASTM D92 4148,1
FLASH POINT, CLOSED CUP °C ASTM D93 4148,1
POUR POINT °C ASTM D97 2879,1
ASTM COLOR - ASTM D1500 2169,6
WATER SEPARABILITY (DEMULSABILITY) - ASTM D1401 6304,0
ACID NUMBER mg KOH/g ASTM D974 3233,9
WATER % v, mg/kg ASTM D95 2961,0
WATER AND SEDIMENT % v ASTM D1796 3697,8
FOAM mL ASTM D892 6304,0
COPPER STRIP CORROSION - ASTM D130 4148,1
CALORIE VALUE cal/g ASTM D240 8105,1
N-HEPTANE INSOLUBLES % w ASTM D3279 4980,4
ASH % w ASTM D482 5035,0
TOTAL SULFUR % w ASTM D4294 5758,2
CONRADSON CARBON RESIDUE % w ASTM D189 7463,8
BMCI - HESAPLAMA 10070,0
CCAI - HESAPLAMA 6222,1

Water and Waste Water Analysis

Water and Waste Water Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
PH (ACCREDITED) - SM-4500 H+ 559,4
CONDUCTIVITY (ACCREDITED) µS/cm SM-2510 559,4
DISSOLVED OXYGEN (ACCREDITED) mg O2 / L SM 4500 O-G 559,4
CHEMICAL OXYGEN DEMAND (ACCREDITED) mg O2 / L SM 5220 D 2565,3
OİL AND GREASE (ACCREDITED) mg/L SM 5520 B 3520,4
TOTAL PETROLIUM HYDROCARBON (ACCREDITED) mg/L SM 5520 F 3738,7
PHENOL (ACCREDITED) mg/L TS 6227 ISO 6439 2224,1
SULPHUR (IODOMETRIC METHOD) (ACCREDITED) mg/L SM-4500 S-2 A/B/C/F 2224,1
AMMONIA NITROGEN (ACCREDITED) mg/L SM-4500 NH3 A/B/C 1855,7
CHROMIUM +6 (ACCREDITED) mg/L SM 3500-Cr B 2074,0
TOTAL CYANIDE (ACCREDITED) mg/L SM 4500-CN A/B/C/E 2961,0
TOTAL SUSPENDED SOLIDS (ACCREDITED) mg/L TS EN 872 1105,2
COPPER (ACCREDITED) mg/L ICP SM 3120 1105,2
MERCURY (ACCREDITED) mg/L ICP SM 3120 1105,2
MERCURY (WITH THE HYDRIDE TECHNIQUE) (ACCREDITED) mg/L ICP SM 3120 2961,0
ZINC (ACCREDITED) mg/L ICP SM 3120 1105,2
CADMIUM (ACCREDITED) mg/L ICP SM 3120 1105,2
LEAD (ACCREDITED) mg/L ICP SM 3120 1105,2
HYDRAZINE (ACCREDITED) mg/L ASTM D1385 846,0
FREE RESIDUAL CHLORINE (ACCREDITED) mg/L SM 4500 Cl 1241,7
COLOR (ACCREDITED) mg/L SM 2120 B/C 1241,7
KJELDAHL NITROGEN (ACCREDITED) mg/L TS 7924 EN 25663 2074,0
TOTAL PHOSPHORUS (ACCREDITED) mg/L SM 4500 P B/E 2074,0
TURBIDITY (ACCREDITED) NTU ASTM D1889 559,4
TOTAL ORGANIC CARBON mg/L SM5310B 1337,2
TOTAL HARDNESS mg/L ASTM D1126 736,8
CA HARDNESS mg/L ASTM D1126 736,8
MG HARDNESS mg/L ASTM D1126 736,8
BICARBONATE mg/L SM-2320 736,8
CARBONATE mg/L SM-2320 736,8
SULPHATE mg/L SM 426-C 736,8
CHLORIDE mg/L ASTM D512 846,0
SILICON DIOXIDE mg/L ASTM D859 2483,4
TOTAL IRON mg/L SM-3500 Fe 1105,2
DISSOLVED IRON mg/L SM-3500 Fe 1105,2
BACTERIAL COLONY COUNT CFU NALCO METODU 2224,1
AMMONIA mg/L LOVIBOND 736,8
TOTAL PHOSPHATE mg/L ASTM D515 736,8
P ALKALINITY mg/L SM 2320 736,8
M ALKALINITY mg/L SM 2320 736,8
ELEMENTS IN WASTEWATERS (AS GROUP) mg/L ICP-OES 8140,0
ELEMENTS IN WASTEWATERS (EACH ELEMENT) mg/L ICP-OES 810,0
ANION DETERMINATION (ACCREDITED) mg/L SM 4110B 7395,6
CATION DETERMINATION (ACCREDITED) mg/L TS EN ISO 14911 7395,6
ACETIC ACID %W PETKİM GC 5417,1
MALEIC ACID %W PETKİM GC 5417,1

Solid/Liquid Waste Analysis

Solid/Liquid Waste Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
ELUATE PREPARATION PROCESS - TS EN 12457 1487,3
DETERMINATION OF FLAMMABILITY CRITERIA - - 8882,9
ELEMENT DETERMINATION (EACH ELEMENT) % w ICP-OES 3329,4
ANION DETERMINATION % w SM 4110B 7395,6
TOTAL ORGANIC CARBON mg/kg TS 12089 EN 13137 1337,2
LOSS ON IGNITION mg/kg - 1105,2
HALOGENS % w XRF 2961,0

Other (Chemical Material) Tests

Salt Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SODIUM CHLORIDE % w TS-933 1855,7
SULPHATE % w TS-933 1855,7
CALCIUM % w ASTM E534 736,8
SALT INSOLUBLE % w DE NORA-3-4B/S/2 736,8
MOISTURE % w DE NORA-3-4B/S/3 736,8
TOTAL IRON mg/L TS-933 736,8
ELEMENT DETERMINATION (AS GROUP) mg/L ICP-OES 6658,8

Polyaluminum Chloride (PAC) Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
DENSITY g/cm3 ASTM D4052 1855,7
ALUMINUM % TS EN 1302 1855,7

Hydrochloric Acid Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
HYDROGEN CHLORIDE % w ASTM D1298 1855,7
TOTAL IRON mg/L DE NORA-3-4-I-1 1855,7
FREE CHLORINE mg/L DE NORA-3-4-I-3 1855,7

Hydrazine Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
DENSITY g/cm3 ASTM D4052 1855,7
HYDRAZINE % w ASTM D2790 1855,7
PH - ASTM D1293 736,8

Calcium Hydroxide Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
CALCIUM HYDROXIDE % w SOLVAY 3.0.55 1487,3

Sodium Bicarbonate Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
SODIUM BICARBONATE % w TS-1282 1487,3
SODIUM CARBONATE % w TS-1281 1487,3
CHLORIDE mg/L TS-1303 1487,3

Sodium Hypochlorite Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
FREE CHLORINE g/L ASTM D2022 1855,7
SODIUM CARBONATE g/L ASTM D2022 1855,7

Organic Peroxide Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
DETERMINATION OF TRAIT AMOUNTT OF PEROXIDES IN ORGANIC SOLVENTS μg/g ASTM E299 3111,1

Detergent Analysis

EXPERIMENT NAME UNIT METHOD PRICE (Excluding KDV)
TOTAL ACTIVE MATERIAL % w TS-518 2224,1
PH %1 - TS-518 736,8
CHLORIDE % w TS-518 736,8

  • The experiments on the sample received by our department are initiated, and the “Experiment Fee Notification Form” is sent to the customer.
  • The total fee amount specified in the "Experiment Fee Notification Form" is deposited into the Bank and Account numbers provided within the same form and also listed below. The payment receipt, with "Petkim Analysis Fee" written on it, is then sent to the Quality Assurance and Technical Service Directorate.

Bank and Account / IBAN Numbers for making the payment to Petkim are as follows:

BANK NAME BRANCH NAME BRANCH CODE ACCOUNT NUMBER IBAN
İş Bankası Petrokimya 3484 20279 TR69 0006 4000 0013 4840 0202 89
Halk Bankası Aliağa 727 13000002 TR70 0001 2009 7270 0013 0000 02
Ziraat Bankası Aliağa 714 7034592-5002 TR49 0001 0007 1407 0345 9250 02
Vakıflar Bankası Petkim 279 00158007290523769 TR73 0001 5001 5800 7290 5237 69
Yapı Kredi Bankası Esentepe 845 70805966 TR14 0006 7010 0000 0070 8059 66
Akbank Aliağa 191 3860 TR28 0004 6001 9188 8000 0038 60
Garanti Bankası İstanbul Kurumsal 381 6287359 TR79 0006 2000 3810 0006 2873 59

  • Once the payment receipt reaches the Quality Assurance and Technical Service Department, the wet signed Test Report, will be dispatched to the customer via mail as an enclosure to the External Letter. Additionally, upon request, it can be sent separately through fax or email.
  • The Test Request Form shares all information from the Test Report exclusively with the authorized personnel of the company/organization listed in the Customer Information. No information is disclosed to third parties.
  • The Test Report for the sample sent by the official institution is sent to the relevant official institution and not to the company associated with the sample.
Experiment Request Form
Warning

The test and analysis results do not serve as a product quality certificate. The report and its findings are strictly prohibited from being utilized for commercial or promotional purposes by the requesting organization and customers. Any surplus customer samples following the testing will be retained for 15 days starting from the report date. Samples that are not claimed by the customer will be disposed of properly according to the sample's requirements.

CONTACT

Petkim Petrokimya Holding A.Ş.
Quality Assurance and Technical Service Directorate
Siteler Mah. Necmettin GİRİTOĞLU Cad. No:6
35800 Aliağa/İZMİR
TURKEY

Phone: (0-232) 616 12 40
Rumeysa YETİM (Extension: 1920)
Ecem KAHRAMAN (Extension: 1990)
Fax (0-232) 616 12 48
Email petkim.laboratuvar@socar.com.tr